2 types of kits available depending which you prefer and which car model you want to use it for.
Lexia 3 Revision B Kit - Usually for cars up to 2011 and not suitable for Peugeot 307 and C5 after 2003 however does vary on ECU.
Lexia 3 Revision C Full Chipset Kit
Works on all car models - supports all latest car models including commercials (S1279 Module needed for Commercials).
LAPTOP SYSTEM WITH LEXIA 3 FULL CHIP REV C KIT
THIS LAPTOP SYSTEM IS READY TO GO NO NEED TO SETUP - PLUG AND PLAY
S1279 MODULE REQUIRED FOR ONLY CERTAIN VEHICLES SEE BELOW DESCRIPTION
S.1279 PP2000 Peugeot S1279 Lexia 3 Citroen Peugeot S1279 module for lexia3 pps2000 Peugeot Citroen Diagnostic tool S.1279 PPS2000 Lexia 3 Citroen Peugeot is ALKcar Diagnostic module of Nemo, Boxer III, Jumper III. S1279 module Interface works with PPS2000 Lexia-3 Citroen Peugeot. S.1279 Module connect between lexia3 interface and new cars. -------------------------------------------------------------------------------- S.1279 PPS2000 Lexia 3 Citroen Peugeot S1279 module S.1279 S1279 module Interface for Lexia-3 Citroen Peugeot S.1279 module of PPS2000 Lexia-3 Citroen Peugeot( Nemo,Bipper,Boxer III,Jumper III) Lexia-3 lexia3 V47.99 PP2000 V25 Peugeot Citroen Diagnostic tool Description: Lexia-3 lexia3 Peugeot Citroen Diagnostic tool i obd car... S.1279 module Ingredients: Diagnostic module of Nemo,Boxer III,Jumper III. S.1279 module of PPS2000 Lexia-3 Citroen Peugeot( Nemo,Bipper,Boxer III,Jumper III) connected between lexia3 interface and new cars . only that module can do it!! Instructions to Use S.1279 module: Peugeout Bipper Peugeout Boxer III Peugeout Boxer III minibus Citroen Nemo Citroen Jumper III Citroen Jumper III minibus S.1279 module Package: S.1279 module obd2 male -obd2 female
Lost CD or need to update your version, our customised with easy to use install guide
LEXIA 3 INTERFACE SUPPLIED WITH DIAGBOX V7.83 FULL VERSION LATEST FIRMWARE - WE SPECIALISE TO ONLY SELL LEXIA 3
FULL CHIPSET REV C - WORKS ON ANY MODEL FROM 1998 ONWARDS
MAIN DEALERS USE THIS TOOL - BUY ONE AND SAVE MONEY £s
This is works on Latest Diagbox available which is supplied.
THIS VERSION IS V50 NOT V48 AS OTHERS ARE SELLING OLD VERSION
USER MANUAL INCLUDED FOR DIAGBOX
virtual XP files included for Windows 7 64bit on CD. NO ONE GIVES THIS
INSTRUCTIONS PROVIDED WITH SUPPORT - OUR INTERFACE WORKS ON PEUGEOT 307 AND CITREON C5 WHERE OTHER SELLERS SELL UNITS WHICH DO NOT WORK ON THOSE MODELS.
MUST TOOL FOR PEUGEOT AND CITREON OWNERS AS IT OFFERS SAME FUNCTIONS AS THE MAIN DEALERS.
Step by Step instructions to help you install (printed in English) and installation Video to show how to install
• Main unit with extension OBD2 cable
• Long 9pin to USB cable
• Short 9pin to USB cable
• OBD2 cable
• 16pin to Clip Cable
• 30pin adapter for older vehicle types
• Software CD and download links for guides etc... V6 DIAGBOX + V7 DIAGBOX AND PP2000, PSA DAM Code builder
• Printed Paper instructions in English with download links to help install.
• Troubleshoot guide provided to help you quickly find solutions.
SUPPORT IS PROVIDED AND QUESTIONS ANSWERED
Need to buy in Bulk, contact us for bulk discounts.
Interface is backward compatible with Diagbox V5.01 and V6.01
Lexia 3 diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorised dealer does. Lexia 3 diagnostics software allows you to perform complete diagnostics from 1995 most present models. Diagnostics Lexia 3 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001). If your unsure please ask or look on forums if your model supported.
Lexia 3 Supported functions
Lexia 3 Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool.
Our diagnostic interface Lexia 3 contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic LEXIA 3 functions are supported
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full
listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98
SR2/2000/XP/WINDOWS 7 with the latest service pack installed.
PP2000 Software Languages
English, German, French, Japanese, Chinese, Russian, Arabic, Spanish, Turkish, Danish, Iranian, Greek, Hebrew, Hungarian, Indonesian,
Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatian, Thai
Lexia 3 Software Languages
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
Included the 30 pin adapter which not every seller includes in their Lexia 3 Kit.
We accept paypal payment
copyright @ 2020 by VEHICLE DIAGNOSTICS UK